| 路由器（Router）是连接两个或多个网络的硬件设备，在网络间起网关的作用，是读取每一个数据包中的地址然后决定如何传送的专用智能性的网络设备，路由器最主要的功能为实现信息的转送。 Cisco胖AP配置，思科胖AP配置，思科AP配置，思科AP常用配置，思科AP配置实例
主要配置命令
hostname ap /设置AP名
dot11 ssid AP-N2 /设置SSID（AP-N2为SSID号）
authentication open /认证开放
authentication key-management wpa version 2 /认证密钥版本为WPA版本2
guest-mode /显示SSID，no guest-mode表示隐藏SSID
wpa-psk ascii 123456789 /SSID登陆密钥设置（123456789为密钥）
exit
interface dot11radio0 /进入2.4G接口
encryption mode ciphers aes-ccm /加密密码AES CCM模式
ssid AP-N2 /加入SSID AP-N2
power local maximum /设置AP信号发射功率，默认可不配置
no shutdown /开启端口
exit
interface dot11radio1 /进入5.8G接口
encryption mode ciphers aes-ccm /加密密码AES CCM模式
ssid AP-N2 /加入SSID AP-N2
power local maximum /设置AP信号发射功率，默认可不配置
no shutdown /开启端口
exit
interface BVI1 进入管理接口
ip address 192.168.0.191 255.255.255.0 /配置接口IP地址
no shutdown /开启端口
ip default-gateway 192.168.0.1 /配置网关
配置范例
version 15.2
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname test-ap
!
logging rate-limit console 9
enable secret 5 $5$4fXI$i1Zl2wBy24uDQd2j2Tuf41
!
no aaa new-model
clock timezone BeiJing 8 0
no ip source-route
no ip cef
!
dot11 syslog
!
dot11 ssid testssid
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii 7 1443130D010939102541
!
dot11 guest
!
username myname secret 5 $4$7p8Z$yjeef33iW422J3bDrdN8Q/
!
bridge irb
!
interface Dot11Radio0
no ip address
no shutdown
!
encryption mode ciphers aes-ccm
!
ssid testssid
!
antenna gain 0
power local maximum
packet retries 64 drop-packet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
!
encryption mode ciphers aes-ccm
!
ssid testssid
!
no shutdown
!
antenna gain 0
power local maximum
peakdetect
dfs band 3 block
packet retries 64 drop-packet
bridge-group 1
bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface GigabitEthernet1
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.0.16 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
ip default-gateway 192.168.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
snmp-server community public RO
bridge 1 route ip
!
line con 0
line vty 0 4
login local
transport input all
!
sntp server 192.168.0.1
end
本文可以帮助您基本地设置和管理您的路由器。
| 
